Adding Front And Back Cover Sheets
Note: Before using the following functions, set the special paper tray
for cover sheets using User Tools.
Note: Before using the following functions, you should change setting to
add blank cover sheets using the User Tools.
Note: This function can be used only when you set a stack of originals
in the document feeder.
Paper tray for normal paper and paper tray for cover sheet of identical size and
direction are required for this function.
When you make more than one set of copies, select optional Sort mode.
Make sure that the cover sheets are set in the special paper tray for
cover sheet.
Touch the [Cover/Slip Sheet]
key.
Touch the [Both] key. Then,
touch the [#] key.
Set your originals in the document feeder.
Press the Start key.
ADDING OR INSERTING SHEETS (Cover/Slip Sheet )
See page 119.
See page 121.
77