Ricoh FT8982 Operating Instructions Manual page 130

USER TOOLS
Copy Face Up
Set high Fusing
temperature level
122
In the default setting, completed copies are delivered as shown
below.
original
Setting 2 Sided 2 Sided face down face down face down
originals
1 Sided 2 Sided face down face down face down
in the
2 Sided 1 Sided face down face down
document
feeder
1 Sided 1 Sided face down face down
Setting 2 Sided 2 Sided face down face down face down
originals
1 Sided 2 Sided face down face down face down
on the
2 Sided 1 Sided
exposure
glass
1 Sided 1 Sided
You can cancel this setting and get face down copies to be
delivered face up and vice versa.
default: No
This function is not in effect in the Tab Sheet mode.
You can also change this setting using the Program/Special
Feature key. The setting set in Special Feature mode is reset to
the setting set in this User Tool by auto reset, pressing the Clear
Modes key, turning off the main switch, or weekly timer.
You can increase the fusing temperature to get better fusability,
for instance, when using thick paper. However, if high
temperature is selected using thick A3 paper, the copying speed
might be reduced after a long copy run.
default: No
on proof
copy
tray
face up
face up
in Sort in Stack
mode mode
face up
face up
face down face up
face down face up