Ricoh FT8982 Operating Instructions Manual page 11

1. Operation unit
2. Document feeder
3. Moving-original
scan table
4. Exposure glass
5. Bypass table
6. 3000-sheet large
capacity tray
(TrayT) (Option)
7. Main switch
8. Front doors
9. 1,700-sheet tray
(Tray 3)
10. 500-sheet tray
(Tray 1)
11. 500-sheet tray
(Tray 2)
12. Bypass exit tray
13. Sorter staplers
(Option)
14. Proof tray
15. Auto response
sensor
Other options: key counter, key counter holder, key counter bracket set
Operator controls and indicators are located here.
Originals inserted into the document feeder are
individually and automatically fed onto and re-
moved from the exposure glass.
See pages 35 and 55.
Position originals here face down for copying.
See pages 54 and 55.
This tray can hold 3,000 sheets of copy paper.
See page 104.
Switches the copier between on and stand-by
conditions ("stand-by" means that the anticonden-
sation heaters are on).
Open to access the inside of the copier.
This tray can hold 1,700 sheets of copy paper.
See page 103.
This tray can hold 500 sheets of copy paper.
See page 102.
This tray can hold 500 sheets of copy paper.
See page 102.
Copies will be sorted, stacked, or stapled here.
See page 85.
When the optional sorter stapler is installed, com-
pleted copies are delivered here not in the Finish-
ing mode.
When operator stands in front of this sensor, the
copier automatically turns off the Screen Saver.
COPIER EXTERIOR
See page 27.
3