Ricoh FT8982 Operating Instructions Manual page 127

2. Select special tray
Tray for Cover
Sheet
Tray for Slip
Sheet
Tray for
Translucent paper
Tray for Tab
Sheet
Set number of
tabs in each set.
(1 ~ 12)
The special trays (cover sheets, slip sheets, translucent paper, and tab sheets) cannot be
used for Auto Paper Select and Auto tray switching.
After setting the special paper tray, you can see which tray is selected on the touch panel
display.
If you select the same tray for cover and slip sheets, "cover" is displayed on that tray key.
You cannot select the same paper tray for the following combinations.
• Paper tray for translucent paper and cover sheet
• Paper tray for translucent paper and slip sheet.
Select the tray for the Cover function. You can select Tray 1, 2, 3,
LCT, Bypass, or No select.
default: No select
Select the tray for the Slip Sheet (Paper Designate and OHP Slip
Sheet) function. You can select Tray 1, 2, 3, LCT, Bypass, or No
select.
default: No select
Select the tray for the translucent paper. You can select Tray 1,
2, 3, LCT, Bypass, or No select.
default: No select
Select the tray for the Tab Sheet function. You can select Tray 2
or No select.
default: No select
You can select the number of tabs for each set in the Tab Sheet
and Sort Tabs functions.
To change the number entered;
• Before touching the [#] key, press the Clear/Stop key.
• After touching the [#] key, touch the key you want to change
its number.
USER TOOLS
119