Temporarily Stopping One Job To Copy
Something Else (Interrupt Copying)
Use the Interrupt key to interrupt a multicopy run to make urgently needed
copies.
Regarding functions that cannot be used together with this function,
page 94.
When you set the original on the exposure glass
Press the Interrupt key. The cop-
ier will stop the copy run and
store the present settings in the
memory. The copier will return to
the ready condition.
Remove the previous original. Set
your original for interrupt copying
on the exposure glass.
page 31.
Make your copies.
After interrupt copying is completed, press the Interrupt key again. The
copier will recall the previous copy settings.
Reset the previous original and press the Start key to resume the
previous run.
C
1
See
BASIC OPERATIONS
2
1
2
see
45