If you select the [Save Area] or the [Delete Area] key in step 3,
designate the area you want to save or delete following the instructions
on the display for original 1 and 2.
To change the number entered:
Before touching the [#] key, press the Clear/Stop key. After touching the [#]
key, touch the key which number you want to change. Then, enter the new
number.
Set originals on the exposure glass or in the document feeder.
The first original should be copied first as shown in the illustrations.
Press the Start key.
Editing The Copy Image When Making Two Sided
Copies
Save Area
EDITING THE COPY IMAGE (Edit Image)
2
1
Delete Area
2
1
71