Ricoh FT8982 Operating Instructions Manual page 61

Check that the tab sheets in the
2nd tray. If not, set the tab sheets
in the tray as shown in the illus-
tration.
The tabs should be aligned to the
right fence of the tray.
Press the Start key.
Entering Copy Job Settings During The Warm-up
Period (Auto Start)
If you press the Start key during the
warm-up period, the Start key will
blink, the copier will start copying after
the warm-up period. Set your copy
settings during warm-up period, then
press the Start key.
To cancel Auto Start, press the
Clear/Stop key.
BASIC OPERATIONS
C
53