Ricoh FT8982 Operating Instructions Manual page 76

EDITING THE COPY IMAGE (Edit Image)
Touch the [Edit Image] key.
Make sure that the [Save/Delete]
key is selected.
Touch the [Delete Area] key.
Then, touch the [#] key.
Designate the area you want to delete following the instructions on the
display.
To change the number entered:
Before touching the [#] key, press the Clear/Stop key. After touching the [#]
key, touch the key which number you want to change. Then, enter the new
number.
Set your originals on the exposure glass or in the document feeder.
Press the Start key.
68