Ricoh FT8982 Operating Instructions Manual page 87

Make sure that the slip sheets are set in the special paper tray for slip
sheet.
Touch the [Cover/Slip Sheet]
key.
Touch the [Paper Designate]
key. Then, touch the [#] key.
Set the original page number you want to copy onto slip sheets using
the 10 keys following the instructions on the display.
To change the number entered:
Before touching the [#] key, press the Clear/Stop key. After touching the [#]
key, touch the key which number you want to change. Then, enter the new
number.
Up to 12 originals can be designated.
After designating, touch the [Last Page] key.
Set your originals in the document feeder.
Press the Start key.
ADDING OR INSERTING SHEETS (Cover/Slip Sheet )
79