Ricoh FT8982 Operating Instructions Manual page 80

EDITING THE COPY IMAGE (Edit Image)
Touch the [Duplex] key.
Select the [1 Sided Originals →
2 Sided Copy] o r [2 Sided
Original → 2 Sided Copy] key
depending on what kind of origi-
nals you use.
Touch the [Edit Image] key.
Select the required setting for
each original 1 (original that will
be copied on the front side of the
copy) and original 2 (original that
will be copied on the reverse side
of the copy).
Touch the [#] key.
If you select the [Save Area], the [Delete Area], or the [Cent./Bord.]
key in step 4, designate the area you want to save or delete following
the instructions on the display for original 1 and 2.
To change the number for Save or Delete Area function;
Before touching the [#] key, press the Clear/Stop key. After touching the [#]
key, touch the key which number you want to change. Then, enter the new
number.
Set originals on the exposure glass or in the document feeder.
The first original should be copied first as shown in the illustrations on page 71.
Press the Start key.
72