Ricoh FT8982 Operating Instructions Manual page 58

BASIC OPERATIONS
Setting Special Functions (Special Feature)
You can change or set the following
settings using the Program/Special
Feature key.
You can also change or set the following settings by using the User Tools. The
default settings of the following functions depends on the default setting set in
the User Tools.
The following functions which have been set in the Program/Special Features
key will be reset to their default setting as set in the User Tools by auto reset,
by pressing the Clear Modes key, by turning off the main switch, or by the
weekly timer.
Thin Paper
In Thin paper mode, the originals (lighter than 52 g/m
damaged when being fed into the document feeder. When the [Thin paper]
key is selected, thin mode is selected.
50
See page 116.
2
, 14 lb) are not