Loading Paper; Non-Recommended Paper For Paper Trays; Notes For Paper - Ricoh FT8982 Operating Instructions Manual

NOTE: Regarding paper sizes that can be set,
148.
NOTE: If you want to change the paper size,

Non-recommended Paper For Paper Trays

Folded, curled, creased, or damaged paper
Torn paper
Perforated paper
Paper with conductive or low electrical resistance coating such as carbon or
silver coating
Thermal paper, art paper
Thin paper that has low stiffness
Damp paper
Wavy paper
Adhesive labels

Notes For Paper

Load paper with the copy side down in the paper trays, and with the copy side
up in the optional large capacity tray. If copies are curled, try turning the copy
paper over in the tray. If there is no improvement, change to copy paper with
less curl.
Do not use copy paper that has been already copied on.
Correct curls in copy paper before loading.
Fan copy paper to get air between the sheets before loading.
Translucent paper and OHP transparencies should be fanned to get air be-
tween the sheets before loading.

LOADING PAPER

LOADING PAPER
see pages 114, 142, and
see page 114.
101