Note: This function can be used only when you have an optional sorter
stapler. Up to 2 sorter staplers can be equipped with your copier.
Note: It is recommended to set originals in the document feeder in
these functions.
To avoid problems caused by curled copies, try turning over the paper stack in
the paper tray. If there is no improvement, change to copy paper with less curl.
Originals set lengthwise cannot be used in the Finishing mode.
Regarding functions that cannot be used together with this function,
page 94.
Sorting Into Sets When The Number Of Originals Is
70 Or Less (123, 123, 123) (Sort)
One copy of each original is delivered to each bin and copies are collated
into sets.
For Sorting, the following limitations apply:
Maximum paper size
Minimum paper size
Maximum paper weight
Minimum paper weight
Maximum capacity of
bins
Paper that cannot be
used
Maximum copy set number:
Metric version
A3
A5
:
160 g/m
2
52 g/m
2
70 sheets (80 g/m
, one-sided)
2
50 sheets (80 g/m
, two-sided)
2
post cards, translucent paper, OHP transparencies, and
20 sets (per sorter stapler)
FINISHING
Inch version
11" x 17"
5
" x 8
1/2
90 lb index
70 sheets (20 lb, one-sided)
50 sheets (20 lb, two-sided)
adhesive labels.
FINISHING
see
"
:
1/2
14 lb
85