Ricoh FT8982 Operating Instructions Manual page 126

USER TOOLS
Auto off
SADF Auto reset
To change the number entered;
• Before touching the [#] key, press the Clear/Stop key.
• After touching the [#] key, touch the key you want to change its number.
118
When the copier is used after the weekly timer (For weekly timer,
see page 124.) has turned it off, the copier will turn itself back
off after the selected time. You can select from 1 minute to 3
hours.
default: 1 hour
Auto off is not in effect in the following conditions.
• When the copier detects anyone operating it.
• When the Start key is red.
• While accessing the User Tools.
When you set one original at a time in the document feeder, the
Auto Feed indicator lights for a selected time after an original is
fed to show that the document feeder is ready for another
original. You can adjust this time from 1 second to 3 minutes.
default: 5 seconds
This function is for the SADF and Moving-original scan modes.
SADF Auto reset is not in effect when the copier detects anyone
operating it.