Enter Configuration Mode; Configure User Accounts And Passwords - Juniper PTX5000 Quick Start Manual

NOTE: These procedures enable you to use the HOST/ETHERNET management port. For the
initial configuration, use a device attached to the CONSOLE port.

Enter Configuration Mode | 72

1.

Configure User Accounts and Passwords | 72

2.
Configure System Attributes | 73
3.
Commit the Configuration | 75
4.
Enter Configuration Mode
1. Verify that the network device is powered on.
2. Log in as the root user. There is no password.
Amnesiac <ttyd0>
login: root
3. Start the CLI.
root@% cli
root>
4. Enter configuration mode.
root> configure
Entering configuration mode.
[edit]
root#
Configure User Accounts and Passwords
For information about using an encrypted password or an SSH public key string (DSA or RSA), see Configuring
the Root Password and user.
72