53
4. Using a number 2 Phillips (+) screwdriver, loosen the four captive screws that fasten the metal retaining
bracket to the PDU, and remove the metal retaining bracket from the PDU (see
Figure 46 on page
53).
Figure 46: Removing the Metal Retaining Bracket from a High Capacity Wye AC PDU
5. Unscrew the retaining nut from the AC power cord (see
Figure 47 on page 53
and
Figure 48 on page
54).
Figure 47: Retaining Nut on an AC Power Cord
1
2
1
Retaining nut
2
AC power cord
—
—