Juniper PTX5000 Quick Start Manual page 48

Figure 41: Metal Brackets for Power Cords
50mm
1 Metal Bracket with label Use for 740-053918,
—
740-059634 Power Cords—740-053918 indicates
the 100-A power cord and 740-059634 the 150-A
power cord for the High Capacity Delta AC PDU.
6. Attach the power cord to the PDU:
a. Using a number 2 Phillips (+) screwdriver, loosen the two captive screws on the metal AC wiring
compartment.
b. Open the metal door of the metal AC wiring compartment.
c. Push the wires of the AC power cord into the area for the metal retaining bracket, and pull the wires
to the left toward the metal AC wiring compartment.
d. Using a number 2 Phillips (+) screwdriver, use the four screws on the metal retaining bracket to
secure the AC power cord to the PDU (see
2 Metal Bracket with label Use for 740-053919,
—
740-059635, 740-035459 Power
Cords—740-053919 indicates the power cord for
the High Capacity Delta AC PDU. 740-059635
indicates the 100-A power cord and 740-035459
the 60-A power cord.
Figure 42 on page 49).
48