Figure 23: Connecting the Metal Retaining Bracket to Three-Phase Delta AC Power Cord
1 1
2
1
Retaining nut
—
2
Metal retaining bracket
—
6. Using a number 2 Phillips (+) screwdriver, loosen the two captive screws on the metal AC wiring
compartment. Open the metal door of the metal AC wiring compartment. Push the wires of the AC
power cord into the area for the metal retaining bracket, and pull the wires to the left toward the metal
AC wiring compartment. Using a number 2 Phillips (+) screwdriver, use the four screws on the metal
retaining bracket to secure the AC power cord to the PDU (see
Figure 24: Connecting Power to a Three-Phase Delta AC PDU
3
3
Three-phase delta AC power cord
—
Figure 24 on page
34).
34