Juniper PTX5000 Quick Start Manual page 56

CAUTION:
L1, L2, or L3 input terminal.
Figure 51: Connecting Power to the High Capacity Wye AC PDU
9. Verify that the AC power wiring connections are correct.
10. Close the door to the metal AC wiring compartment, and use a number 2 Phillips (+) screwdriver to
tighten the two captive screws to secure the door to the metal AC wiring compartment.
11. Verify that the AC power cord does not touch or block access to PTX5000 components, and that it
does not drape where people could trip on it.
12. Repeat the procedure for the other High Capacity Wye AC PDU.
To avoid damage to the PDU, do not connect the neutral wire to the
56