Juniper PTX5000 Quick Start Manual page 40

Packet transport router

Hide thumbs Also See for PTX5000:

Table of Contents

Figure 32: Connecting Power to the Three-Phase Wye AC Power Supply

8. Verify that the AC power wiring connections are correct.

9. Close the door to the metal AC wiring compartment, and use a number 2 Phillips (+) screwdriver to

tighten the two captive screws to secure the door to the metal AC wiring compartment.

10. Verify that the AC power cord does not touch or block access to router components, and that it does

not drape where people could trip on it.

11. Repeat the procedure for the other three-phase wye AC PDU.

Table of Contents