Ptx5000 Compliance Statements For Nebs; Compliance Statements For Emc Requirements - Juniper PTX5000 Quick Start Manual

WARNING:
for another product.

PTX5000 Compliance Statements for NEBS

The equipment is suitable for installation as part of the Common Bonding Network (CBN).
The equipment is suitable for installation in locations where the National Electrical Code (NEC) applies.
The battery return connection is to be treated as an isolated DC return (DC-I), as defined in
GR-1089-CORE.
You must provision a readily accessible device outside of the equipment to disconnect power. The device
must also be rated based on local electrical code practice.
During power supply and air filter maintenance, the cover is intended to be removed from the chassis.

Compliance Statements for EMC Requirements

IN THIS SECTION
Canada | 79
European Community | 79
Israel | 79
Japan | 79
United States | 80
The attached power cable is only for this product. Do not use the cable
78