Product Code; Installation Procedure; Product Outline - Xerox WorkCentre Pro 423 Service Manual

8.7 Side Tray Kit
8.7.1

Product Outline

This kit enables the copies to be output face up.
- When installing this kit on DocuCentre230/280, the following kits are necessary. Prepare
the kits and install them at installation.
(1) Electronic Sort Kit (Product Code: EL200127)(8.3)
(2) Offset Output Kit (Product Code: EL200126)(8.4)
- When installing this kit on DocuCentre230/280CF or 230/280FS, an Offset Output Kit
(Product Code: EL200126)(8.4) is necessary. Prepare the kit and install it at installation.
8.7.2

Product Code

Side Tray Kit: EL200125
8.7.3

Installation Procedure

1. Check the accessories. (Figure-1).
1) Side Tray............. 1
WorkCentre Pro 423/428
(Figure-1) j0hn8022
2. Turn the main unit power off.
On printer or Fax-equipped machines, ensure that outstanding jobs have cleared
before servicing or interrupting the power to the machine as follows:.
•
FAX equipped machines: Ensure that the "Job in Memory" indicator on the control
panel goes out. Press "Job Status:Stop" button and confirm that the job has cleared
from the "Current Jobs" folder.
•
Printer machines: Ensure that "Ready to print or fax" is indicated on the printer
control panel.
Switch off the machine and disconnect the power cord.
3. Remove the Right Blind Cover. (Figure-2)
1) Remove the screws (2).
2) Remove the IIT Right Cover.
4. Secure the OCT Cover with the Screws (2) removed in Step 3.
03/02
8-15
WARNING
(Figure-2) j0hn8023
8.7 Side Tray Kit
CHAPTER 8 ACCESSORIES