Xerox WorkCentre Pro 423 Service Manual page 422

6.1.3 Copy Features
1. Warm up time
Within 30 sec (Requirements:
input voltage)
2. First copy output time (FCOT)
Within 4.5 sec (Requirements: Tray1, A4LEF)
3. Continuous copying speed at 100% magnification (Unit: sheet/min)
Paper size, Direction, Copy Paper feed tray
and Tray Mode
Tray 1
Normal
A4 LEF Simplex 23/28
Duplex 22.5/22.5
8.5"x11" LEF Simplex 23/28
Duplex 22.5/22.5
A4 SEF Simplex -
8.5"x11" SEF
Duplex -
B5 SEF Simplex -
Duplex -
B4 SEF Simplex -
Duplex -
8.5"x13" SEF Simplex -
8.5"x14" SEF
Duplex -
A3 SEF Simplex -
11"x17" SEF
Duplex -
8-kai
B5 LEF Simplex 23/28
Duplex 22.5/22.5
A5 LEF Simplex 23/28
Duplex 22.5/22.5
Postal card LEF Simplex -
Duplex -
Envelope (Long 3) Simplex -
Duplex -
*1 For DC28, copy speed is lowered to 17sheet/min from the 21
WorkCentre Pro 423/428
Temperature: 20°C, Humidity: 60%, Standard rate
Tray 2 - Tray 4
Thick Normal Thick
paper paper
23/28 23/28 23/28
- 22.5/22.5 -
23/28 23/28 23/28
- 22.5/22.5 -
- 17/21.5 *1 14/14
- 14/14 -
- 17/21.5 *1 14/14
- 14/14 -
- 12/15.5 12/15.5
- 12/12 -
- 12/15.5 12/15.5
- 12/12 -
- 12/15.5 12/15.5
- 11/11 -
18/22 23/28 18/22
- 22.5/22.5 -
18/22 - -
- - -
18/22 - -
- - -
18/22 - -
- - -
st
sheet.
How to use the Copy feature Table
a) For any paper feed entry:
•
The upper row shows values for Simplex operation
•
The lower row shows values for Duplex operation
b) For any Tray column:
•
The left hand-figures are the values for WCP 423.
•
The right-hand figures are values for the WCP 428.
4. Magnification
MSI
(1) Preset magnification (6 types)
70%, 81%, 86%, 115%, 122%, 141% (can be adjusted by changing system data)
(2) Variable magnification
25 to 400%(1% increment)
19/19
(3) Magnification error margin (on system operation)
-
19/19
Magnification Platen
(%) (system)
-
*70.7 Within ±1.3%
14/14
*81.6 Within ±1.3%
-
*86.6 Within ±1.3%
14/14
100 Within ±0.8%
*141.4 Within ±1.8%
-
25 to 70 Within ±1.7%
12/12
71 to 99 Within ±1.3%
-
101 to 122 Within ±1.6%
12/12
123 to 150 Within ±1.8%
-
151 to 400 Within ±3.4%
At 100% magnification, an error can be adjusted to less than 0.1% in the fast scan line direction
12/12
or less than 0.2% in the slow scan line direction. (For DADF, when docked with IIT)
-
* Actual set value when the preset (fixed) magnification is set.
(4) Magnification switchover
19/19
Within 0.3 sec.
-
19/19
5. Density adjustment
-
(1) Manual density adjustment: 5 levels
(2) Auto density adjustment AE
19/19
Disabled at Text/Photo and Photo modes
-
19/19
-
03/02
6-5
DADF IOT IIT
(system)
Within ±1.7% - Within ±1.1%
Within ±1.7% - Within ±1.1%
Within ±1.7% - Within ±1.1%
Within ±1.2% Within ±0.6% Within ±0.5%
Within ±2.5% - Within ±1.7%
Within ±2.1% - Within ±1.6%
Within ±1.7% - Within ±1.1%
Within ±2.0% - Within ±1.5%
Within ±2.5% - Within ±1.8%
Within ±7.5% - Within ±3.3%
CHAPTER 6 GENERAL
DADF+IIT
Within ±1.6%
Within ±1.6%
Within ±1.6%
Within ±1.0%
Within ±2.4%
Within ±2.0%
Within ±1.6%
Within ±1.9%
Within ±2.4%
Within ±7.4%
Contents