Isdn/G4 Kit; Product Outline; Product Code; Installation Procedure - Xerox WorkCentre Pro 423 Service Manual

WorkCentre Pro 423/428

8.13 ISDN/G4 Kit

8.13.1

Product Outline

This kit enables communicating in G4 mode through NTT INS64 Net.
- When installing this kit, prepare also the Option Box Kit (Product Code: EL200111) for
installation at the same time.
Ref. A machine with the Additional G3 Port does not require the Option Box Kit
because the Option Box is already mounted.
8.13.2

Product Code

ISDN/G4 Kit: EL200108 (FX)
: EL200138 (FXA,FXK,TFX)
Option Box Kit: EL200111 (FX)
: EL200144 (220V: FXA,FXK)
: EL200143 (110V:TFX)
8.13.3

Installation Procedure

1. Check the accessories. (Figure-1)
ISDN/G4 Kit
1) G4/ICM PWB ......................1
2) INS64 Cable........................1
3) Earth Spring ........................2
4) Screw ..................................2
Option Box Kit
(a) Option Box .........................1
(b) Lower Bracket....................1
(c) Upper Bracket ....................1
(d) Screw.................................8
8-32
03/02
2. Turn the main unit power off.
On printer or Fax-equipped machines, ensure that outstanding jobs have cleared
before servicing or interrupting the power to the machine as follows:.
•
FAX equipped machines: Ensure that the "Job in Memory" indicator on the control
panel goes out. Press "Job Status:Stop" button and confirm that the job has cleared
from the "Current Jobs" folder.
•
Printer machines: Ensure that "Ready to print or fax" is indicated on the printer
control panel.
Switch off the machine and disconnect the power cord.
3. Remove the Screws (3) and the Rear Cover.
4. Remove the Screws (7) and the Electrical Cover.
5. Remove the Screws (2) and remove the Rear Cover from the Cabinet.
6. Install the Upper Bracket. (Figure-2)
Electric parts may be damaged by static electricity. Be sure to wear a wrist strap when handling
electric parts. If no wrist strap is available, touch a metal section before work to eliminate static
electricity as far as possible.
CHAPTER 8 ACCESSORIES
8.13 ISDN/G4 Kit
(Figure-1) j0hn8039
WARNING
CAUTION