Xerox WorkCentre Pro 423 Service Manual page 510

1) Install the Upper Bracket.
2) Tighten the screws (2).
(Figure-2) j0hn8033
7. Install the Lower Bracket. (Figure-3)
1) Install the Lower Bracket.
2) Tighten the screws (2).
(Figure-3) j0hn8034
WorkCentre Pro 423/428
8. Install the Option Box. (Figure-4)
1) Install the Screws (3) on the Stud.
2) Install the Option Box.
3) Tighten the screws (3).
4) Tighten the screw.
9. Connect the Connectors (2) and Flat Cable. (Figure-5)
1) Connect the Connectors (2).
2) Connect the Flat Cable.
03/02
8-33
(Figure-4) j0hn8035
(Figure-5) j0hn8036
8.13 ISDN/G4 Kit
CHAPTER 8 ACCESSORIES