Xerox WorkCentre Pro 423 Service Manual page 502

5. Remove the Screws (3) and the Rear Cover.
6. Remove the Screws (7) and the Electrical Cover.
7. Install the MF Box. (Figure-4)
1) Install the MF Box.
2) Secure it with the KL-Clip.
3) Open the MF Box.
(Figure-4) j0hn8027
8. Connect the Connectors (2). (Figure-5)
(Figure-5) j0hn8028
9. Close the MF Box. (Figure-6)
WorkCentre Pro 423/428
1) Close the MF Box.
2) Tighten the screws (2).
10. Provide an access hole in the Rear Cover for a modular jack. (Figure-7)
1) Remove the blind plate of LINE 1.
03/02
8-25
(Figure-6) j0hn8029
(Figure-7) j0hn8030
8.10 FAX Unit
CHAPTER 8 ACCESSORIES