Xerox WorkCentre Pro 423 Service Manual page 445

WorkCentre Pro 423/428
Custom Presets Chain-Function Code List (MF Area) continued
Chain Func Item
028 154 Selection to store reduced or
100% to A4SEF when Letter
(LEF) size doc. is transmitted
by Auto Magnification on FAX
or delayed Polls
028 155 Printing priority selection
•
)D[ UHFHLYHG
•
$XWR RXWSXW
UHSRUWV
•
/RFDO SULQWLQJ
028 160 Scanner Default display
028 161 Added Scanner display 1
028 162 Added Scanner display 2
028 163 Added Scanner display 3
028 164 Added Scanner display 4
028 165 Added Scanner display 5
028 166 Added Scanner display 6
028 167 Scanner Default display
Resolution
028 168 Scanner Default display
Document Type
028 169 Scanner Default display
Scan density
028 170 Broadcast check display
028 171 FAX Default display
Manual send/receive
028 172 FAX Default display
Receiving mode
028 173 FAX Default display
Mixed size
Description Default
0: To store 100% mag. 0: 100% mag.
1: To store reduced mag.
0 to 63(0 to 0x3F) 0: Low
bit0, 1: Fax received
RI
bit2, 3: Auto output of
reports
0: Low 1: Med. 2: High
0: Basic Features 0: Basic
1: User Customise Features
2: Feature Menu
3: No display
0: None 1
1: Resolution
2: Document Type
3: Scan density
4: Scan size
5: Scan Magnification
6: Duplex document
7: Mixed size document
Same as above 2
Same as above 3
Same as above 4
Same as above 5
Same as above 7
1: 600dpi 2: 400dpi 4: 200dpi
3: 300dpi 4: 200dpi
0: Text 1: Photo 0: Text
2: Text/Photo
1 to 5: Light to Dark 3: Normal
0: Off 1: On 0: Off
0: Receive 1: Send 0: Receive
0: Auto receive 0: Auto
1: Manual receive receive
0: OFF 1: ON 0: OFF
03/02
6-28
6.7.2 How to change Custom Presets in User mode
1. Select "Custom Presets" in menu.
2. Select the Item to be changed.
3. Select "Enter / Change".
4. Select the setting value, then press "Save".
5. Press "Clear All" to return the default display.
CHAPTER 6 GENERAL
6.8 General Information