Rep 6.14 Lamp Wire Harness - Xerox DocuColor 2240 Service Manual

REP 6.14 Lamp Wire Harness

Parts List on PL 18.6
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Remove DADF (REP 5.1).
2. Remove Platen Glass (REP 6.2).
3. Remove IIT Top Cover (REP 6.3).
4. Disconnect Lamp Wire Harness connector and release Clamp Hook
1
Disconnect
connector
2
Release
clamp
Figure 1 Disconnecting Lamp Wire Harness
Initial issue
DC 3535/2240/1632, WC M24
WARNING
(Figure
3
Release the
Clamp Hook and
pull the harness
through hole in
frame
5. Remove Full Rate Carriage
1).
09/03
4-53
(Figure 2).
1
Remove
screws (2)
2
Remove Full
Rate Carriage
Figure 2 Removing Full Rate Carriage
Repairs and Adjustments
REP 6.14