Honeywell Galaxy Flex V3 Series Installer Manual page 97

Table of Contents

Advertisement

Galaxy Flex Installer Manual
0=Disable Exits
1=Enable Exits
Confirm Reduce Reset [51.55.3]
Use this option to allow user reset following an unconfirmed alarm.
0=Off
1=On Unconfirmed
Timeout Confirm [51.55.4]
Use this option to define if an Entry Time-out alarm will contribute to a confirmed alarm
0=Disabled
1=Enabled
HU Confirm [51.55.5]
Use this option to define if a confirmed Hold-up alarm condition should be generated from
two separate Panic or hold-up zone types.
0=Disabled
1=Enabled
HU Time [51.55.6]
Use this option to define the maximum time window between two separate panic zone
activations to generate a confirmed hold-up event. (1-20 hours)
Output type 20 response [51.55.7]
Use this option to define what events the Standard Confirm output type (type 20) will
respond to.
0=Confirmed Intruder events only
1=Confirmed Intruser and Confirmed Hold-up and even ts
A separate output type is also available for confirmed hold-up events only (type 84)
Force Restore [51.56]
Use this option to select when intruder restore signals are transmitted.
1=Unset/Unconfirm
2=System Reset
Exit type zones will only cause unconfirmed intruder alarms. They will
not contribute to the two activations required for a confirmed alarm.
After the expiry of the entry delay, activation of an exit type zone will
be identical to an intruder zone.
Full system reset is required for any intruder alarm.
The system can be reset by a user if the alarm is unconfirmed.
If the alarm is classed as confirmed, a full system reset is required.
Time-out will not contribute (PD6662: 2004)
Time-out will contribute (PD6662: 2010)
Confirmed Hold-up condition will not be generated
Confirmed Hold-up condition will be generated
On unset or at the end of the confirmed time if the alarm is not
confirmed.
Sent when the system is fully reset.
Parameters [51]
97

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Galaxy flex 20 v3Galaxy flex 50 v3Galaxy flex 100 v3

Table of Contents