Install the power supply
5.
Where the mains cable exits the panel, secure it to the panel with a cable tie.
6.
DO NOT apply mains power until additional wiring is complete.
For installation of peripherals please see Appendix G at the back of this manual
The following peripherals are described:
Peripheral
MK8 Keypad/Keyprox
RF Portal
RIO
GSM Module
Ethernet Module
TouchCenter
MAX reader
Power RIO
Audio Interface Module
Door Control Module
Image verification module
16
Description
Standard Display Keypad with Proximity card reader
Wireless interface module
Expander for wired inputs and outputs
Wireless remote communication interface
Internet communication module
Touch-screen display keypad
Self-contained door control with proximity card reader
Remote auxiliary power supply with diagnostic reporting
2-way voice module for listen-in and voice challenge from the
monitoring station
Door controller with Wiegand reader interface
Combined PIR sensor with camera for alarm verification
Galaxy Flex Installer Manual