Honeywell Galaxy Flex V3 Series Installer Manual page 67

Galaxy Flex Installer Manual
2. For access control cards, when the serial number is not printed on the card, the card
number can be learned using the Add Batch [42.2.1] option.
MAX Function [42.1.User code.7]
The card/fob/tag/button can be assigned a single menu option. The user must be authorized
to access the menu option assigned to the MAX, either by the user level assigned or the
Menu Access [68] option. The default option is NOT USED.
To assign a new option:
1. Do one of the following:
Press or
A
Enter the option number directly.
2. Press to accept the selection.
ent
MAX Keypad [42.1.User code.8]
The menu option assigned to the MAX card can be limited to operate on a single keypad.
When you select this option,
specified.
To specify a keypad:
1. Press . The address of the first keypad on the system is displayed.
#
2. Use or to select the required keypad.
A B
3. Press to accept the selection.
ent
Note: The address of the keypad that is currently being used is indicated by a black square
flashing over the first digit of the keypad address.
'Card-Held' Operation
The programmed MAX function is activated when the card/fob /tag is held continuously in
front of the MAX/MicroMAX/KeyProx reader for 3 seconds.
If using a MAX/MicroMAX or KeyProx the reader or KeyProx must be assigned a common
group to the user. The keypad specified in option 7=MAX function displays the assigned
MAX function.
Assigning Dual Functions to MAX Numbers
If a card has a assigned to the number, then any card-held function will only work in
#
conjunction with the user's PIN, provided that the PIN has a
The Dual Focus function will work in either order, but if the card is presented first, the user
has PIN controlled access to the normal menu (see Codes [42] for programming).
If a user's card number is assigned a , then the card becomes Dual access. This means that
it will not open the door without another PIN or card (see Codes [42] for programming).
until the required option is displayed.
B
is displayed indicating that a keypad has not been
Codes [42, Quick Menu 7]
assigned also.
#
67