Honeywell Galaxy Flex V3 Series Installer Manual page 152

Communications [56]
Remote Service [56.4]
û 1 = Access Period
û 1 = Off
û 2 = All Unset
û 3 = Any Set
4 = Any Time
û 2 = Direct Access
û 1 = PSTN (0 = Disabled, 1 = Enabled)
û 2 = GSM (0 = Disabled, 1 = Enabled)
û 3 = GPRS (0 = Disabled, 1 = Enabled)
û 4 = Ethernet (0 = Disabled, 1 = Enabled)
5 = USB (0 = Disabled, 1 = Enabled)
3 = Call back
û 1 = Call Back 1
û 2 = Call Back 2
û 3 = Call Back 3
û 4 = Call Back 4
5 = Call Back 5
Remote Access Period [56.4.1]
Use this option to control how the remote site is accessed by the Remote operator. There are
four modes:
1=Off
2=All Unset
3=Any Set
4=Any Time (default) Access available at any time.
Direct Access [56.4.2]
Use this option to permit access at any time (in conjunction with Access period) to any of
these communication paths or devices: PSTN, GSM, GPRS, Ethernet, USB.
Access is initiated from Remote Servicing. Once access is authorized/initiated, uploading,
downloading and remote servicing can begin.
152
û 0 = PSTN
û 1 = GSM
û 2 = GPRS
3 = Ethernet
Each one of these menu options
û has the same sub-menus options
as 1 = Call Back 1
Remote Servicing access to the panel is disabled.
Access only when all the groups are unset. If groups are not
enabled access is available at any time.
Remote Servicing access will only be granted if any of the groups
or the complete system are set.
Galaxy Flex Installer Manual