Quick Menu [59] - Honeywell Galaxy Flex V3 Series Installer Manual

Quick Menu [59]

Entering a user code, assigned to all groups on a keypad, which is only assigned to a single
group, allows access to all of the user's groups. The user is not restricted by the groups that
are assigned to the keypad as long as there is one group common to both. This means that a
keypad assigned to group 1 only, for example, can be used to set groups 1, 2, 3 and 4 by
using a code with all of these groups allocated.
Keypad Group Restriction
To restrict access only to groups that are common to both the user and the keypad, press the
when assigning groups to the keypad. This means that when a user with access to groups
1, 2 and 3 sets the system on a keypad assigned to groups 2, 3 and 4, only the common
groups (groups 2 and 3) are set.
Assigning Keypad Groups
On selecting the Keypad Groups option, the groups currently allocated to the keypad are
displayed (the default is all groups assigned). Pressing the group number toggles the group
assigned to the keypad.
Note: Also see option 53, to control the buzzer operation on each keypad. This is
independent of the keypad group parameter.
Quick Menu [59]
The quick menu consists of up to ten menu options that are accessed by all type 3 user codes
and above that do not have a
menu to include any menu options. The default settings are shown in the following table:
Modifying the Quick Menu
On selecting the Quick Menu option, the details of the first option assigned are displayed.
This includes the quick menu location, the assigned menu option, the full menu option
number and the assigned user type.
quick menu location
160
assigned to their code type. You can reprogram the quick
Quick Menu Option
Menu No.
0 Omit Zones [11]
1 Chime [15]
2 Display Zones [21]
3 Display Log [22]
4 Print [24]
5 Walk Test [31]
6 Time/Date [41]
7 Codes [42]
8 Summer [43]
9 Eng. Access [48]
Galaxy Flex Installer Manual
User
Type
3
3
4
4
4
5
6
1
6
6
menu options