Honeywell Galaxy Flex V3 Series Installer Manual page 61

Galaxy Flex Installer Manual
Default Codes
The system has three default codes: Manager, Engineer and Remote User.
No. of Codes
Default PIN
100 1234
Note: The user code before the manager code can be reserved as a Guard Patrol code but
is not programmed by default. This code can only be programmed by the installer
via the Engineer code.
Manager Code
The manager is authorized to modify the manager PIN, which cannot be deleted, and assign
MAX features to the code.
Note: The manager PIN can be reset to the default code (1234) by the engineer and remote
code using the Reset Mgr (Manager) parameter (refer to Reset MGR [51.21]). The
manager code defaults to group choice when groups are enabled. The manager is
able to toggle the group choice option on and off using the
The manager code defaults to accessing the full menu. To access the quick menu, remove
the assigned to the manager in the Modify Level option.
Guard Patrol Code
One user code can be reserved as a Guard Patrol code. This has the same level of access to
the system as a Manager code except it has no access to menu 42 for any user
administration. The Patrol code can only be programmed by the installer
Programming Codes
Users can modify their own PINs only.
User Codes [42.1]
Details of the first user (User 001) are displayed. The following typical information is
displayed on the keypad.
■ = pin assigned
= no pin assigned
You can scroll to the specific user or enter a user's number, for example 023 or 069.
When the required code is displayed, press
PIN is displayed first.
Manager
User No. Default PIN
98 112233
user number
001 User
user type
L3
Codes [42, Quick Menu 7]
Engineer
User No. Default PIN
99 543210
user name
■ m
A 1234
to select the modification options; 1=Modify
ent
Remote User
User No.
100
key.
max card/tag/fob assigned
group mode
61