Default Codes; Keypad Menu Timeout; Engineer Mode - Honeywell Galaxy Flex V3 Series Installer Manual

Galaxy Flex Installer Manual

Default codes

The system provides three default codes: Manager, Engineer and Remote User.
Flex model Total No. of
Codes
FX100 100
FX50 50
FX20 25

Keypad menu timeout

If you do not use the keypad for 5 minutes the system reverts to displaying the banner text.
This does not apply if you are logged in as Engineer (type 7).
Note: In the Walk Test option the timeout is 20 minutes if no zones are tested or no keys
are pressed. In 66=PRE-CHECK the timeout is 20 minute after the last zone has
been activated.

Engineer Mode

To program the control panel, the system must be in engineering mode, allowing access to
menu options 50=ENGINEER 1, 60=ENGINEER 2 and 70=ENGINEER 3.
If you are setting up and programming a control panel prior to handover, use the following
procedure to access engineering mode.
To enter Engineer Mode:
1. Enter the default manager code, and then press
2. Press
48 ent 1 ent 1 ent 1 ent
out the next step.
3. Press esc repeatedly to return to the Honeywell banner.
4. Enter the default engineer code, and then press
After handover the codes should have been changed and you will need to get a manager or
other type 6 user to carry out steps 1 and 2. See Engineer Access [48] for more details.
Alternatively any user can present a prox tag to a Keyprox keypad, and then press
simultaneously.
On accessing engineering mode, any group that is set becomes inaccessible. Set groups
cannot be assigned to zones, outputs and any other functions permitting group allocation.
When the engineer code is entered three things happen:
All system tampers become isolated.
You gain access to the full menu.
The banner message is changed to indicate engineer mode.
Manager
Default PIN User No. Default PIN
1234 98
1234 48
1234 23
to enable Engineer Mode. You have 5 minutes to carry
Engineer
User No.
112233 99
112233 49
112233 24
.
ent
.
ent
Default codes
Remote User
Default PIN User No.
543210 100
543210 50
543210 25
and 3
37