Honeywell Galaxy Flex V3 Series Installer Manual page 170

Options [63]
Group Name Display
When viewing the groups assigned to an option, for example user code or outputs, you can
press and together to display the groups individually. The keypad displays the group
#
number, name and the status of the particular option being displayed.
Press to toggle the status of the group. To move to another group, press
#
the number of the group directly.
selected group
press A or B to
move to another
group
Notes on Groups
1. All zones default to group 1.
2. All keypads, user codes and outputs default to all system groups assigned.
3. Remove unused groups from user codes, otherwise the unused groups will set and unset
even though they are not programmed.
4. Final, Keyswitch and Exit can be programmed to function with regard to other groups
during the setting and unsetting procedures (refer to option Program Zones [52]).
5. Outputs can be assigned to any selection of groups. Output activation can be made
dependent on the set or unset status of the assigned groups (refer to Program Outputs
[53]).
6. After programming zones, codes, keypads and outputs into their various groups they
remain programmed if the Group Mode function is disabled. Only Group 1 remains
active.
7. The control panel has multi-user software that allows several users to operate the
system simultaneously.
170
current group name
A2 Sales Dept
[<],[>],#=CHANGE
press # to toggle status
Galaxy Flex Installer Manual
or
A
group status
S
or enter
B,