Honeywell Galaxy Flex V3 Series Installer Manual page 148

Communications [56]
Module config [56.3]
This section allows alterations to be made to the characteristics of the different
communications modules.
û 1 = PSTN
û 1 = Line Fail (0 = Disabled, 1 = Enabled)
û 2 = No. of rings (04 (1-20))
3 = SMS (1 = Centre ID, 2 = Protocol, 3 = Password)
û 2 = GSM/GPRS
û 1 = GSM
û 2 = GPRS
û 3 = Network 1
û 4 = Network 2
û 5 = Network 3
û 6 = SIM PIN
7 = SMS Receipt (0 = Disabled, 1 = Enabled)
3 = Ethernet
û 1 = DHCP (0 = Disabled, 1 = Enabled)
û 2 = IP Address
û 3 = Gateway IP
û 4 = Network Mask
û 5 = Encrypt
û 6 = Line Fail (0 = Disabled, 1 = Enabled)
7 = IP Check Cfg (1 = Intervals, 2 = Acknowledge)
148
1 = Line Fail (0 = Disabled, 1 = Enabled)
û 1 = Encryption
û 1 = Alarm Report (0 = Disabled, 1 = Enabled)
û 2 = SIA Control (0 = Disabled, 1 = Enabled)
3 = IP Check (0 = Disabled, 1 = Enabled)
û 2 = Connection (Timeout, the default is 15 mins)
û 3 = Line Fail (0 = Disabled, 1 = Enabled)
4 = IP Check Cfg (1 = Intervals, 2 = Acknowledge)
û 1 = PLMN
û 2 = APN
û 3 = Login
û 4 = Password
û 5 = Centre No.
6 = Connection (1 = Continuous, 2 = Timeout)
û Same sub-options as Network 1 (without SIM PIN)
û 1 = Alarm Report (0 = Disabled, 1 = Enabled)
û 2 = SIA Control (0 = Disabled, 1 = Enabled)
3 = IP Check (0 = Disabled, 1 = Enabled)
Galaxy Flex Installer Manual