B0048191 / Rev. 1.5
7 Start-up
7.1
Initially applying power to the system
The R1000 UDK20 is designed for an operating voltage of 24 VDC (+ 6 V / - 2 V). This voltage is to
be checked before applying power. The control unit is automatically switched on by applying the
power.
After applying power, the type of system, the version number and the bus system message are
briefly displayed. Then the system switches into that measurement menu, which was active before
the unit was switched off.
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector R1000 series UDK20
with integrated fieldbus interface
Manual
Start-up
103