Fieldbus Configuration File - Roland R1000 Series Manual

Communication with the PLC
6.6

Fieldbus configuration file

6.6.1 GSD file for Profibus-DP
The GSD file contains the specific configuration data of the slave. The data must be known to the
Profibus master.
The manufacturers of the Profibus master supply the tools for the integration of the GSD file into
the Profibus network. Suitable are for example the Siemens step 7 tools. Roland Electronic does
not supply such tools, because they have to be compatible with the interface design of the master.
The GSD file is supplied on a CD or can be downloaded from the Roland homepage.
6.6.2 EDS file for ControlNet
The EDS file contains the specific configuration data of the ControlNet adapter. The data must be
known to the scanner.
The manufacturers of the scanner supply the tools for the integration of the EDS file into the
ControlNet network. Suitable are for example Rockwell RSNetworx configuration tools. Roland
Electronic does not supply such tools, because they have to be compatible with the interface
design of the scanner.
The EDS file is supplied on a CD or can be downloaded from the Roland homepage.
6.6.3 EDS file for DeviceNet
The EDS file contains the specific configuration data of the slaves. The data must be known to the
DeviceNet master.
The manufacturers of the DeviceNet master supply the tools for the integration of the EDS file into
the DeviceNet network. Suitable are for example the Allen-Bradley DeviceNet manager. Roland
Electronic does not supply such tools, because they have to be compatible with the interface
design of the master.
The EDS file is supplied on a CD or can be downloaded from the Roland homepage.
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
98
Double Sheet Detector R1000 series UDK20
with integrated fieldbus interface
Note 24 Bytes I/O must be set.
Note: 24 Bytes I/O must be set.
Note 24 Bytes I/O must be set.
Manual
B0048191 / Rev. 1.5