Table of Contents
Advertisement
Various Shots
Changing the Brightness of the Image
Adjust the brightness of the image. Use this function when the
subject is too bright or too dark, or when the contrast (difference
between light and dark) between the subject and the background
is too great.
1
Press
or
until [EXPOSURE] appears on the
shooting screen�
2
Press
or
to correct the exposure�
• Press
to correct the exposure to the + side to brighten
the entire image.
• Press
to adjust the exposure to the - side to darken the
entire image.
3
Press the Shutter button all the way down�
EXPOSURE
Using the Self-Timer to Take Photos
Use this function to take a group photo including the
photographer or to prevent the camera from moving while the
Shutter button is pressed.
1
Press
or
until [SELF-TIMER] appears on the
shooting screen�
10 SEC
2 SEC
OFF
2
Press
or
to select [2 SEC] or [10 SEC]�
The icon corresponding to the set self-timer appears in the
center of the screen.
• If you do not want to set a self-timer, select [OFF].
3
Press the Shutter button all the way down�
The countdown starts.
When [2 SEC] is selected:
When you press the Shutter button, the self-timer light
flashes.
When [10 SEC] is selected:
When you press the Shutter button, the self-timer light lights
up and starts flashing three seconds before taking the
photo.
To cancel the self-timer halfway through, press
WW_EN
SELF-TIMER
(Back).
17
Advertisement
Table of Contents
