Figure 2 Maintenance tab
Setting the system date and time
To change the system date or time:
1.
From the WebUI, click Maintenance, and then Date/Time. The Date and Time Settings
page is displayed.
2.
Enter the new values, and then click OK.
Figure 3 Date and Time page
Shutting down or restarting the server
CAUTION:
Notify users before powering down the system. Both UNIX and Windows NT users can be drastically
affected if they are not prepared for a system power-down.
1.
From the storage server WebUI, click Maintenance, Shutdown. Several options are
displayed: Restart, Shut Down, and Scheduled Shutdown.
24
Basic Administrative Procedures and Setup Completion