Nfs Async/Sync Settings; Nfs Sharing Protocols Page - HP ProLiant 300 Series Administration Manual

Figure 71 NFS Sharing Protocols page
NFS properties include:
• Async/Sync Settings (not available on all models)
• NFS Locks
• Client Groups
• User and Group Mappings
Settings for asynchronous/synchronous writes and service locks are discussed together in the following
paragraphs of this chapter.
Client groups and user and group mappings are each discussed in separate sections later in this chapter.

NFS async/sync settings

NOTE:
The NFS async/sync settings feature is not available on models.
As mentioned in a previous section, there are two versions of NFS: Version 2 and Version 3. Version 3
supports additional file operations that Version 2 did not have, such as asynchronous file operations.
To indicate whether to use asynchronous or synchronous write settings:
1. From the WebUI, access the NFS Protocol Properties page by clickking Shares, Sharing
Protocols. Select NFS Protocol, and then click Properties.
The NFS Properties page is displayed.
2. On the NFS Properties page, select NFS Async/Sync Settings.
The NFS Async/Sync Settings page is displayed.
3. Select the desired write setting. The default setting is Synchronous writes.
HP ProLiant Storage Server administration guide
139