Viewing Shadow Copy Properties - HP ProLiant 300 Series Administration Manual

1. From the WebUI, click Disks.
2. Click the Shadow Copies tab.
3. Select the volume on which to delete a shadow copy schedule.
4. In the Tasks list, click Set Schedule.
5. On the Manage Shadow Copy Schedules page, select the schedule to be deleted, and
then click Delete.
6. Click OK to confirm the deletion or Cancel to retain the copy.
NOTE:
When deleting a shadow copy schedule, that action has no effect on existing shadow copies. To remove
schedules and all shadow copies in one action, from the Manage Shadow Copies page, click Disable
on the Tasks list.

Viewing shadow copy properties

To view shadow copy properties on a volume:
1. From the WebUI, click Disks.
2. Click the Shadow Copies tab.
3. On the Manage Shadow Copies page, select the volume on which to view shadow copy
properties.
4. In the Tasks list, click Properties.
The Shadow Copy Properties page, as shown in
and time the most recent shadow copy was made, and the maximum size setting.
Change the maximum size limit for all shadow copies, or choose No limit.
For volumes where shadow copies do not exist currently, it is possible to change the location of the
cache file. (See
and the space available on each is presented at the bottom of the page. Managing the cache files
on a separate disk is recommended.
NOTE:
If shadow copies have already been enabled, the cache file location is grayed out. To change this
location after shadow copies have been enabled, all shadow copies must be deleted and cannot be
recovered. Remember enabling Shadow Copies creates a shadow copy by default.
5. Click OK to save changes, or click Cancel to discard changes.
70 Shadow Copies
"The shadow copy cache
Figure 29, lists the number of copies, the date
file" earlier in this chapter). The list of available disks