Creating A Local Dfs Root; Dfs Properties Page, General Tab - HP ProLiant 300 Series Administration Manual

Figure 59 DFS Properties page, General tab
4. On the General tab, select the default settings that are desired when creating a shared directory.
• To set the default to publish the share to the local DFS root, select Publish new shares
to the local DFS root.
• To set the default to publish the share to another DFS root, select Publish new shares to
a domain DFS root or a stand-alone DFS root on a different server. In the DFS
root box, type the path of the default DFS root.
• To not publish the share to a DFS root, select Do not publish new shares to a DFS root.
5. Click OK.

Creating a local DFS root

The WebUI can be only be used to create a single, local stand-alone DFS root on the server as mentioned
previous. To create a domain DFS root use the DFS administrative tool. For more information about DFS
root types refer to the section above entitled
To create a local stand-alone DFS root:
1. From the WebUI, click Shares.
2. Click Sharing Protocols.
3. Click DFS, and then click Properties.
110
Folder, Printer, and Share Management
"Deploying DFS."