Systems Management Homepage - HP ProLiant 300 Series Administration Manual

Figure 10 Systems Management Homepage
The Array Configuration Utility is displayed.
5. Select a controller in the list on the left side to begin configuration.
• The first controller listed is for all drives in the server chassis, and may also connect to drives
contained in an external storage enclosure attached to the server.
• Additional controllers (if present) are used for all externally attached SCSI storage.
CAUTION:
On the first controller there are two logical drives pre-configured under Array A. These two logical
drives are configured for the storage server operating system and should not be altered in any
manner.
6. After the controller is selected there are three ways to configure the storage:
• Express Configuration
Select Express Configuration to answer a few simple questions and allow the controller
to be configured automatically. The Express Configuration is the easiest and fastest way
to configure a controller, and provides the most reasonable configuration possible.
• Configuration Wizards
Select Configuration Wizards to configure a controller through a series of wizards.
Choosing Configuration Wizards is not the fastest or easiest way to configure a controller,
but it does offer more control over the configuration and provides a more customized setup.
• Standard Configuration (default)
36
Disk and Volume Management