Installing Nfs Authentication Software On The Domain Controllers And Active Directory Domain Controllers; Server For Nfs Screen, Server Settings Tab - HP ProLiant 300 Series Administration Manual

Figure 67 Server for NFS screen, Server Settings tab
Installing NFS Authentication software on the domain controllers and Active
Directory domain controllers
In mixed environments (for example, Windows 2000 and Windows NT 4.0), the NFS Authentication
software must be installed on all Primary Domain Controllers (PDCs) and backup domain controllers
(BDCs) that have Windows users mapped to UNIX users. This includes Active Directory domains. For
instructions on setting up user mappings, see "NFS User and Group Mappings."
NOTE:
If the authentication software is not installed on all domain controllers that have user name mappings,
including Primary Domain Controllers, Backup Domain Controllers, and Active Directory Domains, then
domain user name mappings will not work correctly.
SFU 3.5 is used for NFS Authentication. SFU 3.5 can be downloaded at no charge from the Microsoft
web site:
http://www.microsoft.com/windows/sfu/downloads/default.asp
To install the Authentication software on the domain controllers:
From the SFU 3.5 files, locate the directory named SFU35SEL_EN.
1.
2. On the domain controller where the Authentication software is being installed use Windows Explorer
to:
a.
130
Services for NFS/UNIX
Open the shared directory containing setup.exe.