Nic Properties, Teaming Controls Tab, Fault Tolerant Option - HP ProLiant 300 Series Administration Manual

Figure 110 NIC Properties, Teaming Controls tab, Fault Tolerant option
4. Configure the team by choosing either Fault Tolerant or Load Balancing.
The fault tolerance and load balancing options are discussed in the following sections.
5. Click OK to accept the team properties.
6. Click OK in the HP Network Teaming and Configuration Properties dialog box to apply the changes.
7. Click Yes when prompted to apply all configuration changes. Wait while the adapters are
configured. This process could take several seconds.
8. The following screen is displayed, indicating that there are additional procedures to perform in
the NIC teaming process.
HP ProLiant Storage Server administration guide
209