Creating File Share Resources - HP ProLiant 300 Series Administration Manual

13. Present the LUN to the additional cluster nodes.
14. Move the physical disk resource to the other nodes to confirm functionality.
To move a resource:
1. On the Cluster tab in the WebUI, click Cluster Groups.
2. Select the group, and then click Move.
3. Specify the new location for the group, and then click OK.
NOTE:
In multi-node clusters it is necessary to specify the node to move the group to. When a cluster group
is moved to another node all resources in that group are moved.
NOTE:
When a physical disk resource is owned by a node, the disk appears as an unknown unreadable disk to
all other cluster nodes. This is a normal condition. When the physical disk resource moves to another
node, the disk resource then becomes readable.

Creating file share resources

To create a file share resource:
1. Open the WebUI to the Cluster tab, and then click Cluster Resources.
2. Click Create.
3. Click Next to proceed with the wizard.
4. Specify the share name, description, the cluster group in which the share will reside, and the resource
type. The resource type should be File Share.
NOTE:
A file share resource must reside in the same cluster group as the physical disk resource it will
reside on.
HP ProLiant Storage Server administration guide
193