Removing The Print Server Role; Adding An Additional Printer - HP ProLiant 300 Series Administration Manual

12. Select the manufacturer and the type of printer in the presented list, and then click Next. If the
printer does not exist in the list, click Have disk and load the drivers, or select a compatible driver.
NOTE:
On models having print services available, additional print drivers are located on the storage server
in the c:\hpnas\components\HP Storage Server Printer Drivers folder.
13. Enter the name of the desired printer to be presented on the storage server, and then click Next.
14. Enter a Share Name for the printer to be used on the network, and then click Next.
15. Enter a location description and a comment, and then click Next.
16. Select Print a test page, and then click Next.
17. Clear the Restart the add printer wizard if adding only one printer, and then click Finish.
A test page prints.
18. Click OK if the page printed, otherwise click Troubleshoot.
If Restart the add printer wizard was selected, the wizard restarts to add an additional printer.
19. Repeat the steps above for adding an additional printer.

Removing the print server role

To remove the print server role:
1. Select Start > Settings > Control Panel, double-click Administrative Tools, and then
double-click Manage Your Server.
2. Click Add or Remove a Roll.
A wizard starts.
3. Click Next.
4. Select Printer Server in the list of Server Roles, and then click Next.
5. Select the checkbox Remove the printer role, and then click Next.
The printer role is removed.
6. Click Finish.

Adding an additional printer

To add additional printers to the storage server:
1. Select Start > Settings > Printers and Faxes > Add Printer.
The add printer wizard starts.
2. Click Next.
3. Select Local Printer and clear Automatically detect install my plug and play printers.
HP ProLiant Storage Server administration guide
121