Completing The System Configuration; Rapid Startup Configuration Review Window - HP ProLiant ML110 G1 User Manual

6. Configure the Network Interface Information for both NICs. Click
Next to continue.
7.
Configure the System Information. Click Next to continue.
8.
Verify that the information is correct when the configuration review
window is displayed (see
Figure 2 Rapid Startup configuration review window
9.
Click Finish to exit Rapid Startup. If a reboot is required, Rapid
Startup displays a message that a reboot is occurring and that the
configuration information will be set.
The browser returns to the status window. The refresh can take several
minutes if the device was restarted.
NOTE:
After the Rapid Startup Wizard is complete, the Welcome
window becomes the default page.
Completing the system configuration
The basic configuration for the HP ProLiant Storage Server is complete at
this point, however, some computing environments can require additional
settings and configuration.
Figure 2).
HP ProLiant Storage Server user guide
27